A typical compressor installation has a compressor, aftercooler, dryer, filter(s) and a receiver (airtank). One unit, the TEC-55, electronically controls all draining points. This multi-voltage sequential controller can drain up to four outlets. The individual cycle requirements, as well as the overall time cycle, can be adjusted according to your specific requirements. The TEC-55 offers a range of valves specifically designed for filters, general purpose, high pressure or stainless steel.
- Number of Outlets – 4
- Load Capacity – 2A, 80 W per drain
- Interval Time – 0.5 – 10 seconds adjustable
- Total Cycle- 4.5 – 90 minutes adjustable
- Indicators- 6 LED’s (only one LED active at any time)
- Output Connections- Cords with DIN43650A connectors
- Main Connections- Cord
- Housing- ABS, fire resistant
Specifications
Orifice Size |
Depends on valve selected |
Material |
Brass/Stainless Steel |
Size |
1/4, 3/8, or 1/2 Inch |
Supply Voltage |
115 230 V AC/DC |
Valve Open Cycle Time-Adjustable/Outlet |
50/60 Hz 0.5 – 10 Seconds |
Total Cycle- Adjustable |
4.5 – 90 Minutes |
Ambient Temperature |
0 – 65 °C |
Max. Pressure |
230, 300, 600, 1200, 3625, 5000, 6000, or 7000 psi |
Environmental Protection |
IP65/NEMA 4 when installed |
Housing Material |
ABS, Fire Resistant |
| Note: Other pressures are available. Mixing of pressures using one controller is possible. | |
